Hover Protect™ Crystal Clear Protective Film - Prevents Scratches - for Self Balancing Scooter - Virtually Invisible - 6 Pieces (Includes Wheel Covers)

Price: [price_with_discount]
(as of [price_update_date] - Details)

[ad_1] This listing is for 4 pieces of specially cut protective film that is specially designed to be applied to areas exposed to front and back scratches. This does not include parts to cover the wheel cover since some models include a bumper on the wheel cover (but none include protection on the front and rear area above the lights) . It's very easy to get down or fall and let your self-balancing scooter ride on hard surfaces causing unsightly scratches and bumps. Protect your hands-free scooter with this protective film specially designed for 3M paint. This is the same film used to protect expensive cars from rock chips without altering their appearance. Fits your Smart S1 Smart, Swagway, IO Hawk, Leray, CoolReall, OutTop, Phunkee Duck and many others.PROTECT YOUR BOARD - The beautiful finish of your scooter can easily be scratched especially when you are learning to operate or to to teach others. Protect your machine with Hover ProtectTM film, which provides a durable layer of protection against rollers on hard surfaces. Our film has been used for years to protect car paint from rock chips at 70mph and now you can use it to protect your board. SCOOTER NOT INCLUDED. Cover protector NOT INCLUDED (only fender area).
CLEAR CRYSTAL PROTECTION WHERE YOU NEED IT - Your original scooter colors will shine through our clear polyurethane film. Our thick 8mil film with its strong back adhesive is almost invisible after application and covers from one end to the other of the wheels (you adjust the end to fit exactly ).
PERMANENT WITHOUT DELIBERATELY REMOVED - The film can be removed without damaging the finish by picking an edge up and pulling and stretching it when you pull at a low angle (like the 3M tapes). You can also use a heat gun if the paint starts to come off. The film is very durable and will absorb most scuffs or scratches, but if you need to remove it, you can. You can also add multiple layers and maintain the same clarity.
CUSTOMIZED AND EASY TO ADD: Our custom-made 4-piece protective film matches the original Chic Robot / IO Hawk design, Razor, Swagway, Leray, Roam, Q3 and much more. The reason is most of the 2015 self-balancing scooters have the same design or you can easily adjust our film to suit your board. It covers key contact points including hubcaps (end-to-end) and front / rear fender areas above the headlights.
SINGLE INSTALLATION OF 5 MINUTES: 1. Peel off the decal of the coating 2. Wet with water / rubbing alcohol Solution to 75%) 3. Apply and stretch to adjust 4. Scrub any which bubble in the hand or with a credit card 5. Use a razor to cut off excess bubbles or bubbles. That's all!

[ad_2]